E218

 The E218 subwoofer was developed to pair with the E12 or E15 enclosures. Two light-weight, long excursion ND18-S Kevlar Neodymium drivers which utilize Adamson’s Advanced Cone Architecture are mounted in an efficient band-pass subwoofer. The design achieves a remarkable reduction of the rearward radiated energy without dedicated cardioid setups and algorithms. A typical user would appreciate the sonic attack of this design.
 
The E218 can be used ground stacked or flown utilizing the E-Frame Full Line Adapter. The frame also allows the E218, E219 and E12/E15 enclosures to be flown in the same array.
 
The E218 is constructed of (marine) birch plywood as well as aircraft grade steel and aluminum and is equipped with three Speakon NL8 connectors, two parallel in / out plugs and one dedicated output connection point for efficient cable usage. The integrated rigging system allows for either 0° or 3° splay between adjacent enclosures.
Frequency Range (+/-3 dB) 30 Hz - 110 Hz
Maximum Peak SPL** 142
Components LF 2x ND18-S 18" Kevlar Neodymium Driver
Nominal Impedance LF 2x 8Ω
Power Handling (AES / Peak) LF 2x 800 / 3200 W
Rigging

Integrated Rigging System

Connection 3x Speakon™ NL8: 2x Rear Parallel (Pins 1 +/-) and 1x Rear Output (Pin 2 to 1)
Height Front (mm / in) 597 / 23.5
Width (mm / in) 1111 / 43.75
Depth (mm / in) 870 / 34.25
Weight (kg / lbs) 86 / 190
Supported Processing Lake

 

E-Frame Full Line Adapter (930-0019) Suspension frame for E219, E218, E15 and E12 enclosures. Ground stack compatible
E218 Dolly (938-0016) Transports up to 3x E218 subwoofers
E218 Caster / Cover Kit (939-0001) 4x Casters to affix to the back of the subwoofer and a single cover
E218 3up Cover (907-0017) Cover for 3x E218 subwoofers stacked on an E218 Dolly (938-0016)
E-Rack (905-0001) A 10U rack, mounted with Lab.gruppen PLM+ amplifiers, Adamson audio and AC panels and an Ethernet switch

 

E218 Spec Sheet One page spec sheet for the E218 377.25 KB
E-Series Brochure The E-Series Full Line Brochure 3.65 MB
E-Series Product Information Pack Product Information Booklets for the E-Series 3.83 MB
E-Rack Brochure Product Brochure for Adamson's unified rack solution, the E-Rack 1.99 MB
E-Series User Manual Comprehensive User Manual for the E-Series including proper deployment and rigging 10.38 MB
Lake LoadLibrary Adamson LoadLibrary for Lake Controller 6.X 25.65 MB
3D Cad Drawings 3D CAD drawings of all E-Series enclosures 4.66 MB

 

  • E219

    E219

    The E219 Subwoofer was developed to bolster the low-end of the E-Series line of products...

    Giá: Liên hệ

    Liên hệ

  • E119

    E119

    The E119 Subwoofer was developed to bolster the low-end of the E-Series line of products...

    Giá: Liên hệ

    Liên hệ

  • E12

    E12

    The Adamson E12 is a 3 way, true line source enclosure, incorporating proprietary ...

    Giá: Liên hệ

    Liên hệ

  • E15

    E15

    The Adamson E15 is a 3 way, true line source enclosure, incorporating proprietary ...

    Giá: Liên hệ

    Liên hệ