S10n

 The S10n is a 2-way, full range line array cabinet containing 2x ND10-LM Kevlar Neodymium drivers (2x 16 Ω) and an NH4TA2 1.5” exit compression driver (8 Ω). The critically optimized waveguide produces a slightly curved wavefront with a nominal dispersion pattern of 80° x 10° (H x V). The waveguide’s efficiency allows for increased vertical dispersion without sacrificing high frequency presence in the far field. Patent-pending Controlled Summation Technology further eliminates low-mid lobing normally associated with 2-way line source systems.
 
The cabinet construction uses marine grade birch plywood as well as aircraft grade steel and aluminum, and is equipped with two Speakon™ NL8 connectors. The rigging system incorporates the best aspects of previous advancements in our new SlideLock rigging technology. A plate and screw rigging system is also available for fixed installations in the S10ni.
 
The S10n is suited to a wide variety of applications. Its full range capability (60 Hz) at reasonable levels qualifies for applications where sub is not required. Increased vertical coverage (10°) enables the S10 to cover theaters, arenas and stadiums with reasonable speaker quantity. The S10n's narrower horizontal pattern allows for not only increased usability in reflective spaces, but also increases the long-throw capability of an S-Series package. Other target applications include dance clubs, medium size festivals, corporate events and contemporary churches.
Frequency Range (+/-3 dB) 60 Hz - 18 kHz
Nominal Directivity (-6 dB) H x V 80° x 10°
Maximum Peak SPL** 141.3 dB
Components LF 2x ND10-LM 10" Kevlar Neodymium Driver
Components HF 1x NH4TA2 4" Diaphragm / 1.5" Exit Compression Driver
Nominal Impedance LF 8 Ω
Nominal Impedance HF 8 Ω
Power Handling (AES / Peak) LF 2x 350 / 2x 1400 W
Power Handling (AES / Peak) HF 160 / 640 W
Rigging

Slidelock Rigging System, Install Rigging System (S10ni)

Connection 2x Speakon™ NL8
Height Front (mm / in) 265 / 10.4
Height Back (mm / in) 178 / 7
Width (mm / in) 737 / 29
Depth (mm / in) 526 / 20.7
Weight (kg / lbs) 27 / 60, 26 / 58 (S10ni)
Supported Processing Lake

 

S-Series Support Frame (930-0020) Support frame for S-Series enclosures
S-Series Extended Beam (930-0021) Extension beam for larger angles and frame linking
S10 Underhang (931-0010) Suspends S10 enclosures from E-Series 3-way enclosures
S10 Dolly (938-0019) Transports up to 4x S10 enclosures
Dolly Stacking Legs (938-0014) Set of 4 legs to support one dolly
S10 Cover 4up (907-0026) Cover for 4x S10 stacked on an S10 Dolly (part no. 938-0019)
S10i Rigging Frame (930-0024) Support frame for the S10i
S10 Flight Case (901-0003) Road-ready Flight Case for 4x S10. 31.25" x 25" x 50"

 

S10n Spec Sheet One page spec sheet for the S10n 435.87 KB
S-Series Configuration Brochure A document outlining the factory recommended configurations for the S-Series 7.82 MB
E-Rack Brochure Product Brochure for Adamson's unified rack solution, the E-Rack 1.99 MB

 

S10n
S10n
S10n

 

  • S10p

    S10p

    Giá: Liên hệ

    Liên hệ

  • S7p

    S7p

    Giá: Liên hệ

    Liên hệ

  • S118

    S118

    The S118 Subwoofer is the companion subwoofer to the S7. The enclosure is loaded with a light weight, long excursion, 18” ND18-S Kevlar Neodymium driver utilizing Adamson’s Advanced Cone Architecture and a 4” voice coil for exceptional power handling

    Giá: Liên hệ

    Liên hệ

  • S7

    S7

    The S7 is a 2-way, full range line array cabinet containing 2x ND7-LM16 Kevlar Neodymium drivers (2x 16 Ω) and an NH3-8 1.4” exit compression driver (8 Ω)

    Giá: Liên hệ

    Liên hệ

  • S119

    S119

    The S119 Subwoofer is the companion subwoofer to the S10. The enclosure is loaded with a light weight...

    Giá: Liên hệ

    Liên hệ

  • S10

    S10

    The S10 is a 2-way, full range line array cabinet containing 2x ND10-LM Kevlar Neodymium...

    Giá: Liên hệ

    Liên hệ