S7

The S7 is a 2-way, full range line array cabinet containing 2x ND7-LM16 Kevlar Neodymium drivers (2x 16 Ω) and an NH3-8 1.4” exit compression driver (8 Ω). The critically optimized sound chamber produces a slightly curved wavefront with a nominal dispersion pattern of 100° x 12.5° (H x V).  The chamber’s efficiency allows for increased vertical dispersion without sacrificing high frequency presence in the far field.  Patented Controlled Summation Technology further eliminates low-mid lobing normally associated with 2-way line source systems.

The cabinet construction uses marine grade birch plywood as well as aircraft grade steel and aluminum, and is equipped with two Speakon™ NL4 connectors. The SlideLock rigging system ensures easy yet secure setup and teardown.

 

 

The S7 is suited to a wide variety of applications. Its full range capability (80 Hz) at reasonable levels qualifies for applications where sub is not required. Increased vertical coverage (12.5°) enables the S7 to cover theaters and small arenas with reasonable speaker quantity. Other target applications include dance clubs, corporate events and contemporary churches.

 

 

 

Frequency Range (+/-3 dB) 80 Hz - 18 kHz
Nominal Directivity (-6 dB) H x V 100° x 12.5°
Maximum Peak SPL** 138 dB
Components LF 2x ND7-LM16 7" Kevlar Neodymium Driver
Components HF 1x NH3-8 3" Diaphragm / 1.4" Exit Compression Driver
Nominal Impedance LF 2x 16Ω (8Ω)
Nominal Impedance HF
Power Handling (AES / Peak) LF 500 / 2000 W
Power Handling (AES / Peak) HF 120 / 640 W
Rigging

Slidelock Rigging System

Connection 2x Speakon™ NL4
Height Front (mm / in) 203 / 8
Height Back (mm / in) 122 / 4.8
Width (mm / in) 527 / 20.75
Depth (mm / in) 411 / 16.2
Weight (kg / lbs) 15.9 / 35
Supported Processing Lake

 

S7 S7 & S118 Support Frame (930-0025) Support frame for S7 & S118 enclosures
S7 S-Series Extended Beam (930-0021) Extension beam for larger angles and frame linking
S7 S7 Dolly (938-0022) Transports up to 4x S7 enclosures
S7 S7 Flight Case Single 3up (901-0004) Flight Case for 3x S7 stacked on an S7 Dolly (part no. 938-0022)
S7 S7 Flight Case Single 4up (901-0005) Flight Case for 4x S7 stacked on an S7 Dolly (part no. 938-0022)

 

S7 Spec Sheet        One page spec sheet for the S7 

  • S10p

    S10p

    Giá: Liên hệ

    Liên hệ

  • S7p

    S7p

    Giá: Liên hệ

    Liên hệ

  • S118

    S118

    The S118 Subwoofer is the companion subwoofer to the S7. The enclosure is loaded with a light weight, long excursion, 18” ND18-S Kevlar Neodymium driver utilizing Adamson’s Advanced Cone Architecture and a 4” voice coil for exceptional power handling

    Giá: Liên hệ

    Liên hệ

  • S119

    S119

    The S119 Subwoofer is the companion subwoofer to the S10. The enclosure is loaded with a light weight...

    Giá: Liên hệ

    Liên hệ

  • S10n

    S10n

    The S10n is a 2-way, full range line array cabinet containing 2x ND10-LM Kevlar Neodymium drivers (2x 16 Ω)...

    Giá: Liên hệ

    Liên hệ

  • S10

    S10

    The S10 is a 2-way, full range line array cabinet containing 2x ND10-LM Kevlar Neodymium...

    Giá: Liên hệ

    Liên hệ