S10

 The S10 is a 2-way, full range line array cabinet containing 2x ND10-LM Kevlar Neodymium drivers (2x 16 Ω) and an NH4TA2 1.5” exit compression driver (8 Ω). The critically optimized sound chamber produces a slightly curved wavefront with a nominal dispersion pattern of 110° x 10° (H x V). The chamber’s efficiency allows for increased vertical dispersion without sacrificing high frequency presence in the far field. Patent-pending Controlled Summation Technology further eliminates low-mid lobing normally associated with 2-way line source systems.
 
The cabinet construction uses marine grade birch plywood as well as aircraft grade steel and aluminum, and is equipped with two Speakon™ NL8 connectors. The rigging system incorporates the best aspects of previous advancements in our new SlideLock rigging technology. A plate and screw rigging system is also available for fixed installations in the S10i.
 
The S10 is suited to a wide variety of applications. Its full range capability (60 Hz) at reasonable levels qualifies for applications where sub is not required. Increased vertical coverage (10°) enables the S10 to cover theaters, arenas and stadiums with reasonable speaker quantity. Other target applications include dance clubs, medium size festivals, corporate events and contemporary churches.
Frequency Range (+/-3 dB) 60 Hz - 18 kHz
Nominal Directivity (-6 dB) H x V 110° x 10°
Maximum Peak SPL** 141.3 dB
Components LF 2x ND10-LM 10" Kevlar Neodymium Driver
Components HF 1x NH4TA2 4" Diaphragm / 1.5" Exit Compression Driver
Nominal Impedance LF 8 Ω
Nominal Impedance HF 8 Ω
Power Handling (AES / Peak) LF 2x 350 / 2x 1400 W
Power Handling (AES / Peak) HF 160 / 640 W
Rigging

Slidelock Rigging System, Install Rigging System (S10i)

Connection 2x Speakon™ NL8
Height Front (mm / in) 265 / 10.4
Height Back (mm / in) 178 / 7
Width (mm / in) 737 / 29
Depth (mm / in) 526 / 20.7
Weight (kg / lbs) 27 / 60, 26 / 58 (S10i)
Supported Processing Lake

 

S-Series Support Frame (930-0020) Support frame for S-Series enclosures
S-Series Extended Beam (930-0021) Extension beam for larger angles and frame linking
S-Series Moving Point Extended Beam (930-0022) Adjustable beam with moving pick point for exact angles when using a single pick point
S10 Dolly (938-0019) Transports up to 4x S10 enclosures
Dolly Stacking Legs (938-0014) The Dolly Stacking Legs allow for your E-Series or S-Series system to be ground stacked without leaving the Dolly. As the Dolly naturally sits in a downward angle, the stacking legs allow you to elevate your stack to an angle which perfectly suits your particular application.
S10 Cover 4up (907-0026) Cover for 4x S10 stacked on an S10 Dolly (part no. 938-0019)
S10 Underhang (931-0010) Suspends S10 enclosures from E-Series 3-way enclosures
S10 Flight Case (901-0003) Road-ready Flight Case for 4x S10. 31.25" x 25" x 50"

 

S10 Spec Sheet One page spec sheet for the S10 447.72 KB
S-Series Configuration Brochure A document outlining the factory recommended configurations for the S-Series 7.82 MB
E-Rack Brochure Product Brochure for Adamson's unified rack solution, the E-Rack 1.99 MB
S-Series User Manual User manual outlining proper use and safety precautions for the S-Series 5.29 MB
Lake LoadLibrary Adamson LoadLibrary for Lake Controller 6.X 25.65 MB
3D CAD Drawings 3D CAD Drawings of all S-Series enclosures 20.73 MB

 

S10
S10
S10

 

  • S10p

    S10p

    Giá: Liên hệ

    Liên hệ

  • S7p

    S7p

    Giá: Liên hệ

    Liên hệ

  • S118

    S118

    The S118 Subwoofer is the companion subwoofer to the S7. The enclosure is loaded with a light weight, long excursion, 18” ND18-S Kevlar Neodymium driver utilizing Adamson’s Advanced Cone Architecture and a 4” voice coil for exceptional power handling

    Giá: Liên hệ

    Liên hệ

  • S7

    S7

    The S7 is a 2-way, full range line array cabinet containing 2x ND7-LM16 Kevlar Neodymium drivers (2x 16 Ω) and an NH3-8 1.4” exit compression driver (8 Ω)

    Giá: Liên hệ

    Liên hệ

  • S119

    S119

    The S119 Subwoofer is the companion subwoofer to the S10. The enclosure is loaded with a light weight...

    Giá: Liên hệ

    Liên hệ

  • S10n

    S10n

    The S10n is a 2-way, full range line array cabinet containing 2x ND10-LM Kevlar Neodymium drivers (2x 16 Ω)...

    Giá: Liên hệ

    Liên hệ